IEC/EN 60061-3 7006-27K-1 E17 Go Gauge for Caps on Finished Lamps

Product Categories

IEC/EN 60061 Standard [88]
IEC/EN 60065 Standard [14]
IEC/EN 60068 Standard [63]
IEC/EN 60112 Standard [10]
IEC/EN 60238 Standard [6]
IEC/EN 60332 Standard [9]
IEC/EN 60335 Standard [35]
IEC/EN 60529 Standard [55]
IEC/EN 60598 Standard [12]
IEC/EN 60601 Standard [8]
IEC/EN 60695 Standard [11]
IEC/EN 60745 Standard [9]
IEC/EN 60884 Standard [5]
IEC/EN 60950 Standard [19]
IEC/EN 60968 Standard [15]
IEC/EN 61010 Standard [8]
IEC/EN 61032 Standard [58]
IEC/EN 61195 Standard [4]
IEC/EN 62262 Standard [10]
IEC/EN 62560 Standard [9]
UL 1026 Standard [7]
UL 1205 Standard [4]
UL 1244 Standard [5]
UL 1278 Standard [8]
UL 498 Standard [5]
UL 507 Standard [12]
UL 746A Standard [8]
BS 1363 Standard [4]
VDE 0620 Standard [10]
AS/NZS 3112 Standard [7]
Other Standard [144]

SHENZHEN JULIXING INSTRUMENTS CO., LTD.

Contact Now

IEC/EN 60061-3 7006-27K-1 E17 Go Gauge for Caps on Finished Lamps

Contact Now

IEC/EN 60061-3 7006-27K-1 E17 Go Gauge for Caps on Finished Lamps

Go gauge for caps on finished lamps E17, 7006-27K-1 Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E17 caps on finished lamps. Testing: When the cap on a ...

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	SHENZHEN JULIXING INSTRUMENTS CO., LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!